
HS code 8205 70 00 · US HTS 8205.70.00.90
Set · Organizer + 25 collets
Looking for the right collet at every ring costs time, and loose collets get lost or damaged on the bench. This set brings both JURA collets together on one organizer: High Performance for everyday work and heavy drilling, brass for hammering and work on the side of the ring. Every size in sight and in reach, and a calm, clean bench.
Radius Ring Divider included: it divides the radius lines on the side of the ring from one centre point, so every line sits exactly where it should, for fishtail and multi-sided settings. Draw the lines with the Ceramic Scribe: it marks metal like a pen.
In the box
Three JURA products in one set. Each one is also sold separately.
OZ.17
Transparent black acrylic with a detachable foot: every collet size in sight, so you pick the right one at once.
€87 excl. VAT
See details
MH.11.HP · set of 10
Stable up to 250 °C: the ring stays put during everyday setting and heavy drilling and burring.
€88 excl. VAT
See details
MH.11.M · set of 15, Ø15–22 mm
For the most vigorous hammering, French cut and multi-sided settings. Radius Ring Divider and screw included.
€204 excl. VAT
See detailsBought separately €379 · in this set €360.
At the bench
Upgrade to the Brass Collets Quick Release (option, +€25): released and changed from one side in seconds. On this organizer they hang a little looser on the pins than the Classic collets, but they hold and it works. For a tighter fit, slide a short piece of silicone tube over each pin to make it a little thicker. The tube is not included: any hardware store has it.
The collets fit the JURA Classic Quick Change ring fixtures, such as the Horizontal Ring Holder and the Vertical Ring Holder, and the JURA 3X Line with the 3X Holder Kit.
Always choose the correct collet size: a collet that is too small for the ring can break. A spare divider: the Radius Ring Divider + Screw.
Take it to the next level
The ring holders, the 3X Holder Kit, the pen for your layout lines, and rings to practise on.
QC.10
The clamp diamond setters use most: two-sided clamping, turning the ring all the way around.
€162 excl. VAT
See details
QC.09
Holds rings and round watch bezels upright in the collets. Fits the Classic QC system and the 3X Line.
€30 excl. VAT
See details
3X.20.02
Multiple axes on the vise you already have: work around a halo, or on every side of a stone, without re-clamping.
€362 excl. VAT
See details
MH.07
Draws on metal like a pen: the radius lines from the ring divider, clean and exact before you start.
€35 excl. VAT
See details
Titanium · set of 5
Practise your side settings on titanium first, then set the real piece with confidence.
€36 excl. VAT
See details
A spare or extra divider: marks every line on the side of the ring from one centre point.
€27 excl. VAT
See detailsExplore more
Personal advice
Not sure which clamp suits your work? Tell us what you set or engrave, and we will advise you.
Photos are an indication: we keep developing our products, so details may differ slightly.
All prices exclude VAT. Final VAT and shipping are applied at checkout based on your region and VAT registration status.