
Engraving handpiece · EQ.GH.FS
Developed at the request of our friends at FORMA Setting School in Rome. Used to working with this form? You no longer have to adapt your hand to a new tool. The JURA Next Generation Handpiece Forma Style keeps the shape you know and gives you the power and control of a JURA engraving handpiece: its pneumatic air relief lets you set the stroke length precisely, with smooth power transitions from fine detail to heavy hammering. It even files: fit a ceramic polishing stick and it works like a filing handpiece. All on a JURA system that needs no compressor.
Sold only to owners of a JURA engraving system: Graver, Graver Plus or Graver PRO.
Your engraving system
All accessories are sold separately.
Familiar shape
EQ.GH.FS · complete handpiece
Best for
Setters and engravers who prefer this shape, often because they are used to working with a similar form.
Good to know
The Next Generation in a different shape: a choice of comfort, not of function. Complete handpiece with air relief, ready to work.
Essential
set of 8 · not included, sold separately
Start engraving and setting right away, no shaping needed.
Carbide that holds a keen edge. Also sold individually.
Essential
Quick Change Holders, other sizes
Included: Ø2.35 mm · Optional: Ø1.8 and Ø3.2 mm
Ø2.35 mm is included with your handpiece. Add Ø1.8 mm to save time shaping your gravers, and Ø3.2 mm for engraving.
Sold in sets of 10, with organizer and colour coding.
Essential
for Quick Change Holders and M3 screws · not included, sold separately
Tighten and loosen your Quick Change Holders quickly and comfortably.
Anti-roll hexagonal handle: it stays where you put it, never lost in your bench tray.
Take it to the next level
Order together with your Forma Style and save.
CombiDeal
EQ.09 · set of 10
Each size its own set: Ø1.8, Ø2.35, Ø3.2 mm or GRS compatible. With Organizer, colour coding and Mini Hex Key.
More accessories
Carbide Graver Blanks, other sizes
Ø1.8 · Ø2.35 · Ø3.2 mm shank
Add the sizes that match your Quick Change Holders: Ø1.8 mm saves time shaping, Ø3.2 mm for engraving.
Diamond Shapers for Carbide Gravers
PL.DW.SET
Used in your micromotor or Micro Grinder to shape and polish your gravers.
Ceramic Polishing Stones, flat
PL.CF.SET · four grits
Flat stones for filing; shape them first with the Diamond Cutting Wheel.
EQ.GH.QC · for 10 Quick Changes
Every Quick Change in its place on your bench, ready to grab. Handy for your extra sizes.
EQ.GH.PT.0.SP · 2, 4 and 6 g
Each piston with its spring: nine stroke combinations in the handpiece alone. For handpieces from 2024 onwards.
All accessories are sold separately.
What you gain
Work the way you are used to
The shape you know in your hand: no time lost getting used to a new tool.
Full control
Set the stroke length on the handpiece with the air relief, from the finest detail to heavy hammering.
One handpiece, every technique
Engraving, hammering, sculpturing, texturing and filing: no second handpiece for every job.
No compressor
Full engraving power straight from your JURA machine: quiet, clean and plug and play.
Change gravers in seconds
Quick Change Holders with colour coding: swap gravers without losing your setting.
It also files
Fit a ceramic polishing stick or stone and it files like the Micro-Filing Handpiece: casting clean-up and finishing without changing tools.
Complete and ready to work
Fine-tuning on three levels
Compatibility
On a phone, swipe the table sideways to see all columns.
| Your machine | Next Generation Forma Style |
|---|---|
| Graver
|
Fits |
| Graver Plus
|
Fits |
| Graver PRO
|
Fits |
Sold only to owners of a JURA engraving system. This handpiece works only with the original JURA engraving system: Graver, Graver Plus and Graver PRO. Use with any other system voids the warranty and may cause damage. After ordering, please send proof of purchase of your JURA system to info@juratools.com.
Specifications
On a phone, swipe the table sideways to see all columns.
| Specification | Next Generation Forma Style |
|---|---|
| SKU
|
EQ.GH.FS |
| Type
|
Pneumatic engraving and hammering handpiece |
| Stroke control
|
Pneumatic air relief on the handpiece |
| Included
|
2 pistons, 2 springs, 1.5 m hose, 10 Quick Change Holders Ø2.35 mm, colour coding rings, organizer |
| Quick Changes
|
Ø2.35 mm included; Ø1.8 and Ø3.2 mm available |
| Compatibility
|
JURA Graver, Graver Plus and Graver PRO only |
| Warranty
|
1 year |
Explore more
Personal advice
Not sure which handpiece suits your work? Tell us what you engrave or set, and we will help you choose.
All prices exclude VAT. Final VAT and shipping are applied at checkout based on your region and VAT registration status.