
HS code 8207 90 · US HTS 8207.90.60.00
Graver sharpening · Carbide
New batch arriving this month. Order now and we ship as soon as they arrive.
Start at the polish, not at the grinding.Shaping a carbide graver from a blank takes time, w heels and a steady hand – and one uneven face or an off-centre tip shows in every cut. Our gravers come with their geometry already ground, symmetrical and ready for the final polish. A few strokes on the Diamond Wheels and you are setting and engraving with a sharp, mirror-smooth edge that lasts.
Ø 2.35 mm – a JURA signature
As masters at the bench, we know Ø 2.35 mm is the best size for diamond setting. That is why we made it our signature: pre-shaped carbide gravers on a Ø 2.35 mm shank are made only by JURA, in a unique tungsten carbide grade selected by JURA. Eight types – seven V-points from 30° to 120° and a flat – all on the one shank that fits your handpiece and Quick Change Holders. One size, one system, from the first stone to the finest pavé.
Your choice
Set of 8
One of each type in the JURA box. Every shape at your bench from day one.
€156
excl. VAT · €19.50 per graver
Single graver
Refill the shapes you use every day, so you never run short.
€21
excl. VAT · per graver
Several types? Choose a type, set the quantity and add it to the bag – then choose the next type.
In the box
Shank Ø 2.35 mm – fits handpieces and Quick Change Holders for Ø 2.35 mm gravers
Pre-shaped: give each graver its final polish on the Diamond Wheels before first use
Single gravers are packed per piece
Three steps
1
Choose
Take the type you need from the box – the geometry is already ground.
2
Polish
A few strokes on the Diamond Wheels give the faces a mirror finish.
3
Cut
Set and engrave with a sharp edge that leaves bright, clean lines.
At the bench
Pre-shaped
The geometry is already ground. No hours at the wheel – you go straight to the polish.
Symmetrical tips
Both faces ground evenly, so the tip sits centred and every cut runs true.
Tungsten carbide – unique grade
A unique tungsten carbide grade selected by JURA, harder than steel: the edge stays sharp longer, so you resharpen less often.
Ø 2.35 mm shank
The best size for diamond setting – a JURA signature, made only by us. Built for the handpiece, precise and steady under the microscope.
Complete your sharpening
Learn to shape your own gravers
Shaping a carbide graver takes real expertise – the right angle, a symmetrical tip, a mirror polish. It is not something you learn from a manual. Book one day at our bench and learn it hands-on, with your instructor beside you.
Questions about the right graver?
+31 6 2436 7351 · info@juratools.com