
HS code 8205 70 00 · US HTS 8205.70.00.90
Optional · for your JURA vise
One more movement under your vise: tilt in every direction around one fixed centre point.
Tilting the vise usually means losing your piece out of focus and re-centring it again and again, under the microscope and in the middle of a cut. The Jazz Edition adds an orbital movement under your JURA 85 or 100 mm vise from 2023 onwards: the vise swings in every direction around one fixed centre point. The closer your work sits to that point, the less it moves when you tilt, so you re-centre and refocus less often.
It also adds 1.25 kg to your vise: more stability for setting and smaller engraving, while your setup stays compact and easy to move. Like every JURA holding tool, it is calculated to keep your work at the same height under your microscope.
Engraving, also on large pieces? Then look at its big brother, the Heavy Metal Edition, coming in January.

Developed by Jura at his own bench, for the piece under your microscope.
In the box
SKU MH.16
At the bench
Swing in every direction
Tilt the vise wherever the work asks.
Less refocusing
Work near the tilt point moves less when you tilt.
+1.25 kg
More stability for setting and smaller engraving.
Compact
Your setup stays easy to move.
85 and 100 mm
Fits the JURA vises from 2023 onwards.
Add it any time
With a set when you order, or later.
Choose your rhythm
Meet the Heavy Metal Edition, coming in January. JURA vises from 2023 onwards have a thread in the bottom, so they fix directly onto both bases.
Jazz Edition · JURA 85 and 100 mm vises from 2023 onwards
Orbital Base
Tilt your vise in every direction around one fixed centre point.
The vise keeps its own axes, as on your Eccentric, 3X MAX or 3X Line.
MH.16 · €196 excl. VAT · order it at the top of this page.
Coming in January
Heavy Metal Edition · JURA 85 and 100 mm vises from 2023 onwards
Orbital Base Heavy Duty
Need more weight? Your 85 or 100 mm vise becomes a heavy duty vise, only when you need it: made for engraving.
The vise keeps its own axes, as on your Eccentric or 3X MAX.
EG.HM · base only, or set EG.HM.SET with 2 Engravers Clamps 35 mm, which hold watch cases, knives and plates at the orbital centre point · preorder from November, with a preorder discount
Compare
On a phone, swipe the table sideways to see all columns.
| Jazz Edition | Heavy Metal Edition | |
|---|---|---|
| Fits | JURA 85 and 100 mm vises from 2023 onwards | JURA 85 and 100 mm vises from 2023 onwards |
| Swing | In every direction | In every direction |
| Turning | — | Turns like a turntable |
| Adds to your setup | +1.25 kg | +5 kg, low profile |
| Ergonomic design | — | Your hand rests naturally |
| Included | The base | The base only, or as a set with 2 Engravers Clamps 35 mm: they hold flat engraving work, such as watch cases, knives and plates, at the height of the orbital centre point, so the piece stays close to that point when you tilt and you refocus less. |
| Best for | Setting and smaller engraving | Engraving, also large pieces |
| Code | MH.16 | EG.HM · set EG.HM.SET |
| Availability | Available now, €196 excl. VAT | January 2027 · preorder from November |
Three steps of weight for the same vise: on its own for light work, on the Jazz Edition for more stability, on the Heavy Metal Edition for engraving.
Good to know
Complete your setup
Explore more
Personal advice
Not sure which base suits your work? Tell us what you set or engrave, and we will advise you.
Photos are an indication: we keep developing our products, so details may differ slightly.
All prices exclude VAT. Final VAT and shipping are applied at checkout based on your region and VAT registration status.