
Diaset BV · Utrecht, The Netherlands
Everything you agree to when you buy a tool or book a bench with us, written out plainly and split by who you are and what you are buying.
These terms apply to every order and every booking made with Diaset BV, directly or through www.juratools.com. Please read them before you place an order. Your statutory rights as a consumer are not affected by anything written here.
We do two things: we make and supply tools, and we teach. The rules are not the same for both, and they are not the same for a private person as they are for a registered business. So instead of one long document we have split them into four. Start with the table below to see which one is yours.
Read this before you order
By placing an order or booking a course you accept these terms. Please read the ones that apply to you first — they are short, and they are written to be understood rather than to be skipped.
Every purchase and every booking is made under Dutch law, wherever in the world you are and wherever the goods are delivered. Disputes go to the courts of Utrecht, the Netherlands. This is set out in full further down this page.
If you pass our tools on to anyone else, the responsibility for that is yours. Resale requires a written agreement with us, and anyone who puts a JURA tool into someone else's hands — dealer, distributor, employer, school or private person, sold or given — takes full responsibility for doing so. See the Business Terms.
Did you buy your JURA tool from a dealer or anyone other than us? Then please go back to them. Your contract is with whoever sold you the tool, and they are the ones who handle your warranty, returns, complaints and support. We can only help the customer we invoiced ourselves. If you are not sure whether you bought directly from us, look for an invoice from Diaset BV — if you do not have one, your point of sale is the place to start.
Who you are dealing with
JURA Tools is the brand of Diaset BV, founded by Jura in 2000 and run by his family since. Every tool is designed and engineered by Jura himself and finished, tested and packed in our own facility in Utrecht. Our components are manufactured in ISO 9001:2015 and ISO 13485:2016 certified facilities, the second of which was developed for medical devices and carries the tolerances we want.
Because we are a small family company, an order is handled by people who know what is in the box. That is also why we ask you to read these pages: they set out honestly what we can promise and what we cannot.
We supply tools for professional use, and most of our customers are businesses. The prices shown in the shop are B2B prices, excluding VAT and freight.
Which route you take depends on where you are and whether you hold a VAT number. The same rules apply to course bookings.
| Where you are | How you order | VAT | Which terms |
|---|---|---|---|
| EU, with a valid VAT number | Through the shop | Dutch VAT within the Netherlands. Elsewhere in the EU, no VAT once the number is verified | Business |
| EU, without a VAT number | Write to us — checkout is not available to you | Included in the invoice we send | Consumer |
| Outside the EU | Through the shop | No VAT charged; import duties and local taxes are yours | Business |
Checkout inside the EU requires a valid VAT identification number. The shop validates it automatically against the EU VAT system, and an order cannot be completed without a number that passes. If you do not hold a VAT number, write to info@juratools.com with what you need and we will make up your invoice by hand and send it to you by email, with VAT and freight included.
Outside the EU there is no VAT number to supply and no register we can check a buyer against. Those orders go through the shop and are handled under our Business Terms, and completing one confirms that you are buying as a business or professional.
The distinction is not a formality. A business purchase and a private purchase carry different deadlines for reporting a problem, different warranty periods and different rules on returns.
Courses have separate Terms & Conditions, though the VAT rules above apply to them in the same way. Those rules are on the Training Centre page.
Since 29 August 2025 the United States charges import duty on every shipment, whatever it is worth. The $800 duty-free allowance is gone. If you ordered from us before that date and paid nothing at the border, that has changed, and the amount can be substantial.
The duty is set by US customs and is payable by you as the importer. We never receive it and we cannot reduce it.
Please write to info@juratools.com before you order and tell us which you prefer:
If neither is arranged, the courier will ask you for payment on delivery. An unpaid charge is billed back to us as the sender, and we then invoice it to you in full. The detail is in the Business Terms.
"Every detail must have a reason. If not, it's wasted energy."
— Jura
Consumer Terms
Buying privately in the EU. Cooling-off period, returns, statutory guarantee.
Read more →
Business Terms
Buying tools as a company or professional. Inspection duties, commercial warranty, customs.
Read more →
Training Centre
Booking a bench in Vigo or Utrecht. Down payment, cancellation, conduct, course material.
Read more →
Privacy Policy
What we do with your data, who we share it with, and the rights you have under the GDPR.
Read more →
This section applies to everyone, whatever you buy and whoever you are.
Intended for trained professionals
JURA Tools are precision instruments intended for use by trained people working in diamond setting, engraving, jewellery making, micro-machining and related fields. They are not designed for untrained individuals or general consumer use. Every user must have enough technical knowledge, experience and training to operate the equipment safely.
Where a private individual buys from us, this remains true — but it does not remove that person's rights under consumer law. It describes what the tool is for, not who is legally protected.
Keep away from children
All tools must be stored securely and kept out of reach of children at all times. Children must never operate, handle or be near the equipment without direct, continuous and competent supervision by a responsible adult. Failure to supervise may result in severe injury.
Your responsibility as a user
By owning or using JURA Tools you accept responsibility for:
Where our liability ends
To the extent permitted by law, JURA Tools is not liable for injury, damage, loss or claim resulting from:
We act in accordance with Dutch law.
Training, judgement and maintenance
It is the responsibility of the user or the employer to make sure that any operator has received adequate training, instruction and hands-on experience before using the equipment. Professional tools require professional competency, and a lack of training significantly increases the risk of injury or damage.
Our tools are designed and manufactured to the highest professional standards, but no tool can compensate for reckless or inattentive behaviour. Operators must exercise caution, good judgement and awareness of the risks that come with precision equipment.
Routine maintenance, cleaning and inspection are the user's responsibility. Any unauthorised modification, alteration, disassembly or non-approved repair may compromise safety and will void warranties and certifications. Only original JURA Tools components or approved accessories should be used.
Please address your point of sale
If you bought your JURA tool from a dealer, a distributor, a shop, a workshop, an employer, an online marketplace, or from anyone at all who is not Diaset BV, your contract is with them and not with us. They are the people to go to for a warranty claim, a return, a complaint, a missing part or a question about your order. They sold you the tool, they set the terms of that sale, and they are responsible for standing behind it.
Our warranty runs to the customer we invoiced, and does not transfer with the tool. We cannot process claims, returns or refunds for a purchase we were not part of, and we have no record of a sale we did not make.
Not sure which applies to you? Look for an invoice from Diaset BV. If you have one, write to us and we will help. If you do not, your point of sale is where to start. And if you are simply stuck on how to use a tool, ask us anyway — technical questions are welcome whoever sold it to you.
We work from the Netherlands and our products are designed, produced and documented to Dutch and European standards. We do not certify our products against the regulations of any country outside the EU, and we cannot advise on them.
If you are ordering from outside the EU, you are responsible for complying with all local, regional and national laws, occupational safety regulations, import rules and professional requirements that apply where you are. We are not responsible for legal, regulatory or compliance issues arising from a failure to meet those standards.
All purchases, bookings and interactions involving JURA Tools — including any claim or dispute arising from our products, services, documentation, safety instructions, warranties or any contractual or non-contractual obligation — are governed by the laws of the Netherlands, without regard to conflict-of-law principles.
Any dispute that cannot be resolved between us will be submitted to the competent courts of Utrecht, the Netherlands. By purchasing from or using JURA Tools you agree to that jurisdiction.
If you are a consumer resident in another EU country, this choice of law and forum does not deprive you of the protection of the mandatory consumer rules of your own country, or of your right to bring proceedings in the courts of your place of residence.
Nothing in this clause prevents us from seeking urgent injunctive or protective measures in any appropriate jurisdiction to protect our intellectual property, confidential information or other legitimate interests.
We update these terms from time to time. Your order or booking is governed by the version in force at the moment you placed it. Please read the current version before every new order.
Diaset BV — brand owner of JURA Tools
Proostwetering 22-A, 3543 AE Utrecht, The Netherlands
Chamber of Commerce (KvK): 30184982
VAT identification number: NL8184.72.534B01
Orders and general enquiries: info@juratools.com
Company address for payments: info@diaset.nl
Website: www.juratools.com
Last updated: 21 August 2026. Something unclear? Write to info@juratools.com — we would rather answer a question before an order than after one.