
New for the USA ★★★★★
Nothing to pay at your door · 9 Nov – 31 Dec 2026
One price, US import duties included – from our bench to yours · Terms & conditions apply
New for the JURA Family
Personal get-started call
Free with every JURA machine (30 min) and vise set (20 min) – book via your order confirmation
Only for orders placed directly in our webshop juratools.com
Holiday shipping
Last shipments of 2026: 18 December
Orders after that leave our bench from 4 January 2027
Our gifts to you
The JURA Christmas gift worth €75
Personally selected for you – with every order above €1,500
The JURA T-shirt on top worth €35
Above €3,000 – Jura’s portrait on the back, in your size
Engraving and micromotor, quiet and clean: innovation that inspires, at your bench.
Developed at our own bench
A diamond setter needs two machines at the bench: an engraving system and a micromotor. Engravers mostly reach for the engraving alone — but the micromotor widens the work, and the two crafts blend.
JURA builds both, developed by Jura over twenty-six years at his own bench: ergonomic design where every part earns its place. Take the complete all-in-one machine, or separate units — only what your work needs. No compressor, no bulky equipment, no noise: a clean, quiet bench with full power under control.
Made for the modern setter and engraver — to take your skills to the next level, with more control, efficiency and precision.
![]()

Developed by Jura over twenty-six years at his own bench: every part earns its place.
Our machines
Recommended
engraving + micromotor · no compressor required
€4,150
Best for
Diamond setting and engraving in one machine.
Good to know
Pneumatic engraving and a full-power micromotor in one unit, with no compressor. Comes with the JURA Slim Fit micromotor handpiece (EQ.14.01); other handpieces are optional upgrades.
pneumatic engraving · no compressor required
€3,090
Engraving, hammering, sculpturing, texturing and filing, with full power and no compressor.
Takes all JURA engraving handpieces.
engraving + micromotor + air tools · no compressor for engraving
€4,675
The complete workstation, plus hot and cold air.
Comes with the JURA Slim Fit micromotor handpiece (EQ.14.01). Only the hot and cold air guns need air: the small, affordable JURA Mini Compressor is all it takes.
Compare at a glance
Every JURA machine arrives complete: ready to work the day it reaches your bench, at one price.
Nothing to buy before you start, nothing hidden afterwards. Everything else is an upgrade, only if your work calls for it.
On a phone, swipe the table sideways to see all columns.
| Polishing Motor | Graver | Graver Plus | Graver PRO | |
|---|---|---|---|---|
| Features | ||||
| Pneumatic engraving | — | ✓ | ✓ | ✓ |
| Micromotor | ✓ | — | ✓ | ✓ |
| Hot & cold air blowers | — | — | — | ✓ |
| Compressor required | No | No | No | Small Mini Compressor (€268) — air guns only |
| Included as standard | ||||
| Next Generation engraving handpiece | — | ✓ | ✓ | ✓ |
| Slim-fit handpiece (EQ.14.01) | — | — | ✓ | ✓ |
| Heavy-duty handpiece · JURA by NSK (EQ.14.03) | ✓ | — | — | — |
| Micro-filing handpiece (EQ.14.04) | ✓ | — | — | — |
| Quick Changes, colour-coded (10 ×, Ø2.35 mm) | — | ✓ | ✓ | ✓ |
| Graver blanks (10 ×, Ø2.35 mm) | — | ✓ | ✓ | ✓ |
| Pistons & springs (nr. 1 & 2) | — | ✓ | ✓ | ✓ |
| Quick-change organizer | — | ✓ | ✓ | ✓ |
| Micromotor bench holder | ✓ | — | ✓ | ✓ |
| Round-shank polishing sticks (3 ×: fine, medium, rough) | ✓ | — | — | — |
| Flat polishing sticks (3 ×: fine, medium, rough) | ✓ | — | — | — |
| JURA diamond wheel | ✓ | — | — | — |
| Best for | Polishing, filing, casting clean-up | Engraving, hammering, filing | All-in-one system | All-in-one system with air tools |
And the system grows with you. There are four micromotor handpieces to choose from — a slim-fit handpiece, a slim-fit JURA by NSK handpiece, a heavy-duty JURA by NSK handpiece, and a micro-filing handpiece — alongside the engraving handpieces (Next Generation, hammering, GRS-compatible), quick changes and gravers in every shank size, and sharpening and maintenance parts. Whenever a job asks for something particular, the JURA solution is ready: one versatile system that keeps expanding with you.
The Polishing Motor is the same JURA micromotor, supplied as a complete polishing set with the heavy-duty handpiece and accessories.
One point of contact
Every JURA machine is developed, built, serviced and used by us — at our own bench, every day. We know each one in detail, from the feel of its vibration to its sound. This means one point of contact and short lines: you speak directly with the people who build the machines. As a family company, we stand behind our product.
Each machine is made to order in our own workshop — never mass-produced — so please allow around 6–8 weeks. Thank you for supporting a small family company.
New orders are welcome from everyone. For after-sales service on a machine you bought through a dealer, please contact your dealer directly.
All prices exclude VAT. Final VAT and shipping are applied at checkout based on your region and VAT registration status.