
Engraving handpiece · EQ.GH.CC
Built up a collection of gravers in GRS quick changes? You do not have to redo them. Whether you are moving from a GRS engraving system to JURA, or want to swap your original GRS quick changes between both systems, this handpiece takes them as they are: every graver you have shaped keeps working, on a JURA system that needs no compressor. Its short, compact JURA design sits comfortably in your hand and keeps you close to your work. It even files: fit a ceramic polishing stick and it works like a filing handpiece.
Designed as a second or backup handpiece, with slightly less power than the Next Generation, our first choice as main handpiece. Limited availability.
Sold only to owners of a JURA engraving system: Graver, Graver Plus or Graver PRO.
Your engraving system
All accessories are sold separately.
Limited availability
EQ.GH.CC · pneumatic engraving handpiece
Best for
A second or backup handpiece for setters moving from a GRS system to JURA, or using their original GRS quick changes on both systems.
Good to know
Takes GRS quick changes and works only on JURA engraving systems, not on GRS machines. One set of 10 JURA-style Quick Change Holders Ø2.35 mm included.
Essential
set of 8 · not included, sold separately
Start engraving and setting right away, no shaping needed.
Carbide that holds a keen edge. Also sold individually.
Essential
Quick Change Holders, GRS compatible
EQ.GH.QC.CC · available in Ø2.35 mm only · extra sets sold separately
One set of 10 comes with the handpiece. Like the elegant, smooth and short JURA design? Add more sets of 10.
For other sizes, use your original GRS quick changes.
Essential
for Quick Change Holders and M3 screws · not included, sold separately
Tighten and loosen your Quick Change Holders quickly and comfortably.
Anti-roll hexagonal handle: it stays where you put it, never lost in your bench tray.
Take it to the next level
Order together with your Handpiece and save.
CombiDeal
GRS compatible Quick Change Holders
EQ.GH.QC.CC · set of 10 · Ø2.35 mm
One extra set of JURA-style Quick Changes that fit this Handpiece.
More accessories
Diamond Shapers for Carbide Gravers
PL.DW.SET
Used in your micromotor or Micro Grinder to shape and polish your gravers.
Ceramic Polishing Stones, flat
PL.CF.SET · four grits
Flat stones for filing; shape them first with the Diamond Cutting Wheel.
EQ.GH.PT.0.SP · 2, 4 and 6 g
Each piston with its spring: nine stroke combinations in the handpiece alone. For handpieces from 2024 onwards.
All accessories are sold separately.
What you gain
Keep your gravers
Your GRS quick changes and the gravers in them keep working: nothing to redo.
No compressor
Engraving power straight from your JURA machine: quiet, clean and plug and play.
Short and comfortable
A compact JURA handpiece that sits comfortably in your hand, with elegant JURA-style Quick Change Holders included.
Change gravers in seconds
Swap gravers without losing your setting or your concentration.
It also files
Fit a ceramic polishing stick and it files like the Micro-Filing Handpiece: casting clean-up and finishing without changing tools.
Always a backup
A second handpiece on your bench: set up for another job, or ready when your main handpiece is being serviced.
Complete and ready to work
The organizer is not included.
Fine-tuning
Compatibility
On a phone, swipe the table sideways to see all columns.
| Your machine | GRS Quick Change compatible |
|---|---|
| Graver
|
Fits |
| Graver Plus
|
Fits |
| Graver PRO
|
Fits |
Sold only to owners of a JURA engraving system. This handpiece works only with the Graver, Graver Plus and Graver PRO, not with GRS machines. Use with any other system voids the warranty and may cause damage. After ordering, please send proof of purchase of your JURA system to info@juratools.com.
Specifications
On a phone, swipe the table sideways to see all columns.
| Specification | GRS Quick Change compatible |
|---|---|
| SKU
|
EQ.GH.CC |
| Type
|
Pneumatic engraving handpiece for GRS quick changes |
| Stroke control
|
Pistons and springs; power and stroke speed on the machine (no air relief) |
| Included
|
2 pistons, 2 springs, 1.5 m hose, 10 JURA-style GRS compatible Quick Change Holders Ø2.35 mm, colour coding rings |
| Quick Changes
|
Ø2.35 mm JURA-style included; for other sizes use your original GRS quick changes |
| Compatibility
|
JURA Graver, Graver Plus and Graver PRO only; not for GRS machines |
| Warranty
|
1 year |
Explore more
Personal advice
Not sure which handpiece suits your work? Tell us what you engrave or set, and we will help you choose.
All prices exclude VAT. Final VAT and shipping are applied at checkout based on your region and VAT registration status.
GRS is a registered trademark of Glendo LLC. JURA Tools is not affiliated with or endorsed by GRS. The name is used only to show compatibility.