
HS code 8205 70 00 · US HTS 8205.70.00.90
Set of 15 · Ø15–22 mm
Built for the hammer. Hammer setting is hard on a collet: softer ones give way, and the ring loses its seat. These brass collets take the most vigorous hammering, and help you lay out your work on the side of the ring too.
In the box
15 Brass Collets Classic, Ø15–22 mmRadius dividerScrew
SKU MH.11.M
Good to know
Compatible with the JURA Classic Quick Change ring fixtures, such as the Horizontal Ring Holder (QC.10), and the JURA 3X Line
Made for work on the side of the ring: French cut and multiple-side setting. The steps on the sides fix the ring firmly in that position.
Centre work is possible too. Setters who use it with the ring in the centre usually do so for hammering, because the brass collet absorbs the vibration. In the centre the collet expands much harder, so for other centre work we prefer the High Performance collets ourselves.
New collets are stiff at first and become more flexible with use. Tighten the ring with two hex keys turned against each other.
Always choose the correct collet size: a collet that is too small for the ring can break.
Radius divider and screw included; a spare or extra set: the Radius Ring Divider + Screw (SP.RD)
Pair them with the Orbital Holder, using the screw and cylinder of the 3X Holder Kit
Options: the Organizer with brass and High Performance collets, or 4 additional sizes while the last batch lasts
The photo shows 12 collets; the set contains 15
At the bench
Made for hammering
Robust brass that withstands even the most vigorous hammering, for long-lasting durability.
Radius divider
The new radius divider and screw make layout on the side of rings and other pieces effortless.
Smart steps
Steps on the sides support fishtail settings and multi-sided settings on micro bands.
Which one do you need?
High Performance · MH.11.HP
Set of 10, high-temperature polymer
Stable up to 250 °C: for heavy drilling and burring
Uses the standard screw set: Spare Horizontal Ring Holder Screw Set (SP.QC.10)
Brass Classic · MH.11.M · this page
Set of 15, Ø15–22 mm
For the most vigorous hammering
Radius divider and screw included
Uses the standard screw set: Spare Horizontal Ring Holder Screw Set (SP.QC.10)
Brass Quick Release · MH.11.M.QR
Set of 15 brass collets, Ø15–22 mm
Released and changed from one side in seconds
Includes the new screw set for the Horizontal Ring Holder; extra set: Quick Collet Screw Set (SP.QC.11)
In six 3X sets
Want to know how JURA tools add real value to your business?
Take it to the next level
The radius divider, quick release, the holder, and the collets for heavy drilling.
Marks every line on the side of the ring from one centre point: made for fishtail setting. For both brass collet sets.
€27 excl. VAT
See details
MH.11.M.QR
15 brass collets, Ø15–22 mm, released and changed from one side in seconds.
€230 excl. VAT
See details
QC.10
The clamp diamond setters use most: two-sided clamping, turning the ring all the way around.
€162 excl. VAT
See details
MH.11.HP
Set of 10 in a high-temperature polymer, stable up to 250 °C: the ring stays put, even during heavy drilling and burring.
€88 excl. VAT
See detailsExplore more
Personal advice
Not sure which clamp suits your work? Tell us what you set or engrave, and we will advise you.
Photos are an indication: we keep developing our products, so details may differ slightly.
All prices exclude VAT. Final VAT and shipping are applied at checkout based on your region and VAT registration status.