
Upgrade for your Micro Grinder
Add the JURA E-Type Motor (EQ.MG.ET) to your Micro Grinder Starter Set and one control box does two jobs. Unplug the grinding assembly, plug in the E-Type Motor, and you have a light micromotor for micro work, tool making and quick adjustments at the bench.
Handpiece not included: choose the one you need, sold separately. Only compatible with the JURA Micro Grinder control box.
Your E-Type system
Upgrade for your Micro Grinder
EQ.MG.ET · 3 N·cm · handpiece not included
Best for
Turning your Micro Grinder into a second micromotor: micro-filing, fine setting with small stones, tool making and quick adjustments at the bench.
Good to know
Plugs into the Micro Grinder control box. Only compatible with the JURA Micro Grinder.
Recommended
EQ.14.02 · sold separately
Fine setting with small stones, slim and forgiving.
Ideal if you are used to a flex-shaft motor.
Recommended
EQ.14.03 · sold separately
Robust support while engraving, such as micro-chasing.
A solid weight in the hand. Not for large burs on this motor.
Handpiece
EQ.14.04 · sold separately
Micro-filing, deburring and fine texturing.
Reciprocating, not rotating: takes round and flat ceramic sticks, 12,500 strokes per minute.
Also fits: the JURA Slim Fit (EQ.14.01) and every other JURA E-Type micromotor handpiece. All handpieces are sold separately. See them all under Machine Accessories.
How it works
1Unplug the grinding assembly2Plug in the E-Type Motor3Click on your handpiece
One control box, two tools, ready in seconds.
What you gain
A second motor at the bench
Make and adjust your own tools without unclamping your main motor. A real time-saver for every quick job at the bench.
Grows with your work
Start with one handpiece and add the others whenever your work asks for them.
Switch handpieces in seconds
E-Type: pull one handpiece off, click the next one on. No tools, no lost time.
Light for small stones
A light, compact motor for fine setting with small stones. Ideal for small hands.
Hours of filing saved
With the Micro-Filing Handpiece it files for you with a reciprocating back-and-forth stroke, 12,500 strokes per minute, right under the microscope.
Smart value
No second control box to buy: you use the one from your Micro Grinder.
Who it is for
Accessories
Sold separately, to get the most out of each handpiece.
For the Micro-Filing handpiece
For the setting handpieces
Before you order
A light touch works best. With 3 N·cm torque, let the bur do the work: pushing hard always works against you. Three rules keep your work precise and your handpiece in shape for years:
The E-Type Motor does not have enough torque for large burs. Large burs from Ø2 mm and polishing mandrels: only with the Heavy Duty handpiece on the full-power JURA Micromotor.
No Micro Grinder yet? Choose the Micromotor Light: the same E-Type Motor with its own control box, pedal and a handpiece of your choice.
Specifications
On a phone, swipe the table sideways to see all columns.
| Specification | E-Type Motor |
|---|---|
| SKU
|
EQ.MG.ET |
| Included
|
E-Type Motor; handpiece not included |
| Torque
|
3 N·cm |
| Connection
|
Plug-in on the JURA Micro Grinder control box |
| Handpieces
|
All JURA E-Type micromotor handpieces, Ø2.35 mm shank |
| Compatibility
|
Only with the JURA Micro Grinder control box |
| Warranty
|
2 years on the electrical parts; bearings are not covered |
Personal advice
Not sure which handpiece suits your work? Tell us what you set or file, and we will recommend the right one.
All prices exclude VAT. Final VAT and shipping are applied at checkout based on your region and VAT registration status.