
Micromotor handpiece · EQ.14.02
Still mastering the delicate control that ball burs ask for? A slip in your workflow should not cost you your handpiece. The JURA by NSK Slim Fit Pavé is a high-quality slim handpiece built by NSK, with the fine ergonomics essential for precision pavé work and a stronger, more durable inside. It is lightweight and reliable, with smooth, vibration-free performance for long hours of fine setting.
Similar in shape and balance to the JURA Slim Fit (EQ.14.01), it is the better choice if you are new to a micromotor system, used to a flex-shaft motor, tend to skip the gradual ball bur progression, or simply prefer a more robust handpiece that tolerates a less careful workflow.
E-Type: change handpieces in seconds on the same motor. For the JURA Micromotor, Graver Plus and Graver PRO, and all standard E-Type micromotor systems.
Your micromotor system
All accessories are sold separately.
Forgiving & durable
EQ.14.02 · E-Type micromotor handpiece
Best for
Fine pavé for setters new to a micromotor system, used to a flex-shaft motor, or still building a careful workflow.
Good to know
The same slim fit and balance as the JURA Slim Fit, with a more robust build that forgives a less careful workflow. Not for polishing or low-quality mandrels.
Essential
the full range · not included, sold separately
Every drill and bur you need for setting, in one category.
For 2.35 mm shank drills and burs; choose the sizes for your stones.
Essential
not included, sold separately
Cooler, cleaner cutting, a longer life for every drill and bur, and less wear on your handpiece.
A touch on the tip before you start.
Essential
Lance · 0.3 mm tip · not included, sold separately
For the finest pavé work: open and clean the smallest seats with control.
Slim and precise, for the smallest stones.
Other micromotor handpieces
EQ.14.01
Our lightest and shortest handpiece, for experienced setters. Standard with the Graver Plus and PRO.
The Slim Fit Pavé is not meant for polishing. For polishing, choose the JURA by NSK Heavy Duty (EQ.14.03). Our heaviest handpiece, with an independently adjustable chuck: very suitable for polishing wheels and mandrels, and for large burs from Ø2 mm.
What you gain
More forgiving
A robust build that tolerates a less careful workflow while you learn.
Built to last
Enhanced internal build quality for long-term durability.
Slim and precise
Ultra-slim, ergonomic design for maximum control in fine pavé.
Smooth all day
Vibration-free performance for long hours of fine setting.
Change in seconds
E-Type: switch to another JURA handpiece on the same motor.
Grows with you
Master the workflow on the Slim Fit Pavé; move to the JURA Slim Fit whenever you like.
Recommended speeds
On a phone, swipe the table sideways to see all columns.
| Bur type | Speed |
|---|---|
| Drills and ball burs
|
3,000 – 4,000 rpm |
| Cylinders and tapered burs
|
5,000 – 6,000 rpm |
Important usage note. A JURA E-Type micromotor is not a flex-shaft motor: it is a delicate, precision system. Always build up ball bur sizes gradually, from small to large, to keep full control and get fine results, and use lubricant. Avoid cheap ball burs and mandrels, especially mandrels: they can damage the bearings and shorten the life of your handpiece.
Disclaimer
The JURA by NSK Slim Fit Pavé is NOT meant for polishing, and NOT for low-quality burs or mandrels, even with its more robust build. The handpiece comes with a 1-year warranty. Polishing, large or low-quality burs and mandrels, and working without lubricant each leave their own recognisable wear in the handpiece; this wear is not covered by the warranty.
Specifications
On a phone, swipe the table sideways to see all columns.
| Specification | JURA by NSK Slim Fit Pavé |
|---|---|
| SKU
|
EQ.14.02 |
| Type
|
E-Type micromotor handpiece, by NSK |
| Shank
|
2.35 mm shank tools and burs |
| Not for
|
Polishing, large burs and low-quality mandrels |
| Speeds
|
Drills and ball burs 3,000 – 4,000 rpm; cylinders and tapered burs 5,000 – 6,000 rpm |
| Compatibility
|
JURA Micromotor, Graver Plus and Graver PRO; all standard E-Type micromotor systems |
| Warranty
|
1 year |
Personal advice
Not sure which handpiece suits your work? Tell us what you set, and we will help you choose.
All prices exclude VAT. Final VAT and shipping are applied at checkout based on your region and VAT registration status.