
Micromotor handpiece · EQ.14.03
Polishing wheels and large burs make a light handpiece shake, tire your hand and wear out the bearings. The JURA by NSK Heavy Duty is our heaviest handpiece, built for exactly this work. Its independently adjustable chuck holds polishing wheels and mandrels true, reducing vibration and the damage that imbalance causes. Silent, strong and vibration-free, with a weight balance that keeps your hand relaxed through long sessions: the best choice for demanding work.
E-Type: change handpieces in seconds on the same motor, no separate micromotor needed. For the JURA Micromotor, Graver Plus and Graver PRO, and most E-Type micromotor systems.
Your micromotor system
All accessories are sold separately.
Best for polishing
EQ.14.03 · E-Type micromotor handpiece
Best for
Polishing, large burs from Ø2 mm, large bezel settings and torque-heavy work.
Good to know
Our heaviest handpiece, with an independently adjustable chuck for polishing wheels and mandrels. Too bulky for fine pavé, small corners or the inside of a ring.
Essential
Premium Multi-Layer Goat Hair Polishing Wheels
not included, sold separately
Soft, even polishing for a bright finish on your settings.
They run true in the Heavy Duty's adjustable chuck.
Essential
not included, sold separately
Clean, even polishing that runs true in the Heavy Duty's adjustable chuck.
Made for the steady power of this handpiece.
Essential
Diamond Shapers for Carbide Gravers
PL.DW.SET · not included, sold separately
Shape and polish your carbide gravers in this handpiece: sharp, mirror-bright cutting edges at your own bench.
The steady Heavy Duty is the ideal handpiece for them.
Other micromotor handpieces
EQ.14.02
The same slim fit, with extra durability. Recommended if you are new to a micromotor system.
For fine pavé, small corners and the inside of a ring, choose a slim handpiece: the JURA Slim Fit or the JURA by NSK Slim Fit Pavé.
What you gain
Made for polishing
The independently adjustable chuck keeps wheels and mandrels running true.
Large burs, full control
Exceptional stability for large burs from Ø2 mm and big bezel settings.
Less fatigue
Its weight balance keeps your hand relaxed through long sessions.
Silent, no vibration
Strong and steady, for precise results.
Protected bearings
Patented dust-proof system keeps polishing debris out.
Fits under the microscope
Compact length for limited space at the bench.
Use it right
Important usage note. A JURA E-Type micromotor is not a flex-shaft motor: it is a more delicate, precision system. Always build up ball bur sizes gradually, from small to large, to keep full control and get fine results, and use lubricant. Avoid cheap ball burs and mandrels: they can damage the handpiece, and cheap mandrels in particular can damage the bearings.
Disclaimer
The Heavy Duty is built for polishing and large burs, but NOT for low-quality burs or mandrels. The handpiece comes with a 1-year warranty. Low-quality burs and mandrels, unbalanced polishing wheels and working without lubricant each leave their own recognisable wear in the handpiece; this wear is not covered by the warranty.
Specifications
On a phone, swipe the table sideways to see all columns.
| Specification | JURA by NSK Heavy Duty |
|---|---|
| SKU
|
EQ.14.03 |
| Type
|
E-Type low-speed handpiece, by NSK |
| Maximum speed
|
35,000 rpm |
| Maximum torque
|
4.1 N·cm |
| Dimensions
|
Length 109.3 mm × diameter 24.5 mm |
| Weight
|
118 g (without cord) |
| Burs
|
2.35 mm shank burs, up to 50 mm long |
| Chuck
|
Independently adjustable, for polishing wheels and mandrels |
| Dust protection
|
Patented built-in dust-proof system that keeps debris out of the bearings |
| Compatibility
|
JURA Micromotor, Graver Plus and Graver PRO; most E-Type micromotor systems |
| Warranty
|
1 year |
Personal advice
Not sure which handpiece suits your work? Tell us what you set or polish, and we will help you choose.
All prices exclude VAT. Final VAT and shipping are applied at checkout based on your region and VAT registration status.